Installing Replacement iPod Batteries Successfully |
|
Before we begin, be aware that changing your IPOD BATTERY is not the same process on all models. You might require separate instructions if you are using an iPod Mini, or older iPods such as the 1st or 2nd generation. It’s more like the same song with slightly different lyrics to it so you might be able to get the overall drift but it’s highly advised you don’t go in blind should you encounter any problems along the way. Another reason you should make up your mind before doing this is that leaving the case open for more than 30 minutes causes the adhesive glue which holds both cases together to dry out meaning you have to find something else to glue them back. That is an additional delay in getting your music box back to business. This only happens in some iPod models like the iPod mini. You should also be aware that different batteries exist for different iPod generations and in most cases, these batteries are not compatible. We use the 3rd Generation iPod for this exercise so exact details of changing your own IPOD BATTERY may be different especially if it’s from another generation. The first thing you need to do is purchase a DIY kit for any of the vendors that sell them. iPodjuice.com and iPodbattery.com are quite popular for this. You may also use a very flat screwdriver for this exercise but we prefer one of those plastic kits so you do not mar or scratch the case trying to open it. Don’t forget to also purchase a replacement battery and make sure it’s one that fits your iPod model. Once you have gotten all the necessary materials, you are ready to get down to business. Lastly, before we start make sure to place yourself in a bright non-carpeted environment. Remove static electricity by touching a metallic object every now and then.
Opening the iPod Turn off your iPod. Take the sharp end of your iPod opening tool and get it in between the plastic and the metal. Start lengthwise and slowly work your way around the edges until you are through. Flip open the case and that’s done. Forging Ahead and Removing the Hard Drive Now that the case is open (your iPod should still be turned off), remove the blue foam rubber sitting on the hard drive making sure to protect a bronze ribbon that connects the motherboard to the metal case. Remove the hard drive by lifting the smooth side on it and gently disconnect the connector from the motherboard. Removing the Battery If you’ve ever used a cell phone, locating the battery of your iPod shouldn’t be difficult. But for those that are err…it’s the black object located at the top right hand side of what’s left of your iPod. Lift it out but be careful to disconnect a couple of wires that run around into a white connector box. Do this gently. Throw that battery out the window and replace with the new batteries. Closing it Up |
